Sale!
dtf custom sheets
SKU: N/A Categories: , Tags: , , , , ,

DTF | Custom Transfer Sheets

100% Cotton | 100% Polyester | Cotton/Poly Content Blends

The ideal solution for small projects with complex full color graphics. DTF transfers are digitally printed onto a clear roll of heat transfer film using CMYK with a white underbase for opacity on dark fabrics.

(4 customer reviews)

$7.99 – $35.99

A gang sheet is a method of printing multiple designs on the same transfer sheet. Our High Quality (Direct To Film)  transfers allow anyone from small to large shops, or hobbyists to print any design on any product.

*FOR NEXT DAY ORDERS: Please order before 1 PM Eastern Time (cutoff time)

 

How To: Instructions

To ensure your DTF transfer looks professionally pressed every time, follow these five simple steps.

  1. No Need To Pre-Press Or Pre-Iron: Removing moisture is unnecessary. Only do a prepress if you so desire.
  2. Position Your Design: Take your time to line up your transfer in the desired location on your item. Normally, there is no need to use heat-resistant tape on flat heat presses to keep your design in place, however it is highly recommended when pressing transfers onto hats or when using an iron to keep the transfer in place.
  3. Press: Press your transfer with medium pressure at 310°F / 155°C for 15 seconds. You cannot damage the transfer by pressing with more heat, pressure, or time — within reason. However, too much heat can damage your garment, so test first and use parchment paper or a protective guard sheet to protect your garment from a direct iron.
  4. Let It Cool. Then Peel It: After pressing, let your transfer rest until it is cool to the touch (minimum of 15-30 seconds). Once cool, lift the transfer from one corner and gently peel back. We have a saying which is, don’t use your hands, use your EYES. This ensures every piece of your design is adhering to your item. If not, stop peeling, lay it back down, and trouble shoot as follows — (1.) If some or all of the design does not transfer AND it was cool when peeling, it means there was not enough heat, pressure, or time. Press your transfer again with more pressure and time first (+5-10 seconds). (2.) If that doesn’t work, try 15°F heat increments until you find the sweet spot. You truly cannot damage the transfer by pressing multiple times.
  5. Final Press & Wash Instructions: Place the parchment paper included or a single layer of t-shirt material over the design and press again for 15 seconds to soften the design, increase durability, and remove shine. If you want a shiny finish, cover with a protective guard sheet for the final press. When washing, flip shirt inside out, wash on cold and dry using low heat or hang.
  • Printed with the highest quality inks, film, and Kodak TPU powder to give you the brightest whites and colors on any type, material, color, or stretchiness of garment.
  • We have vigorously tested our transfers on a variety of garments with washer and dryer tests. The ink will never run off the transfers onto garments and we have had results up to 60 wash tests before degradation.
  • Every order is reviewed by one of our 50+ professional designers to ensure proper and optimized printing with ability to assist you with background removal or other cleanup if you leave us notes in checkout.
  • Every order is 100% satisfaction guaranteed or we will reprint your order for you!
All file types accepted, vector files are always preferred, raster art should be at least 300 dpi. No gradients on edges. Use Gradients only on top of solid color backgrounds.
To ensure your DTF transfer looks professionally pressed every time, follow these five simple steps.

  1. No Need To Pre-Press Or Pre-Iron: Removing moisture is unnecessary. Only do a prepress if you so desire.
  2. Position Your Design: Take your time to line up your transfer in the desired location on your item. Normally, there is no need to use heat-resistant tape on flat heat presses to keep your design in place, however it is highly recommended when pressing transfers onto hats or when using an iron to keep the transfer in place.
  3. Press: Press your transfer with medium pressure at 310°F / 155°C for 15 seconds. You cannot damage the transfer by pressing with more heat, pressure, or time — within reason. However, too much heat can damage your garment, so test first and use parchment paper or a protective guard sheet to protect your garment from a direct iron.
  4. Let It Cool. Then Peel It: After pressing, let your transfer rest until it is cool to the touch (minimum of 15-30 seconds). Once cool, lift the transfer from one corner and gently peel back. We have a saying which is, don’t use your hands, use your EYES. This ensures every piece of your design is adhering to your item. If not, stop peeling, lay it back down, and trouble shoot as follows — (1.) If some or all of the design does not transfer AND it was cool when peeling, it means there was not enough heat, pressure, or time. Press your transfer again with more pressure and time first (+5-10 seconds). (2.) If that doesn’t work, try 15°F heat increments until you find the sweet spot. You truly cannot damage the transfer by pressing multiple times.
  5. Final Press & Wash Instructions: Place the parchment paper included or a single layer of t-shirt material over the design and press again for 15 seconds to soften the design, increase durability, and remove shine. If you want a shiny finish, cover with a protective guard sheet for the final press. When washing, flip shirt inside out, wash on cold and dry using low heat or hang.

Direct-to-Film (DTF) transfers are full-color heat-applied transfers for light and dark garments. No weeding or masking is required and DTF transfers can be applied to cotton, cotton/poly blends, 100% polyester and many more substrates.

Additional information

DTF Gangsheet Size

8.5" x 11" Inch, 11" x 17" Inch, 13" x 19" Inch, 22" x 24" Inch, 22" x 36" Inch
Turnaround Time

Next Day, 2-3 Business Days, 3-5 Business Days

4 reviews for DTF Custom Gang Sheet

  1. Marcus –

    Loved it. ordered online but called in for help with sizing design to gangsheet. they resized everything for me at no additional cost. The were shipped to me with in 3 days. you guys are awesome!!

    • bselite1 –

      We want you to be satisfied with our prints so if helping you helps us, then were all satisfied. thank you for your kind review.

  2. Randy Burks –

    Good Quality and Fast Turnaround. These guys I recommend if you need good quality and fast turnaround.

    • bselite1 –

      Thanks and hope we can assist you in the future!

  3. John –

    I order here because it’s local. I can order online and pick up in store next day. I’m able to get orders out to my customers so much faster and the print quality is amazing!

    • bselite1 –

      We appreciate your 5 star review. Thank you for letting us be your go to print shop here in Lansing.

  4. Tracy –

    Love It!

    • bselite1 –

      Thank you!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

You may also like…